|
|
Durvesh Mendhekar
|
|
Oct 14, 2009 20:53:27 GMT
|
|
Hi,
I got the below error while creating the recovery tape.
ERROR: SIGHUP has caused the termination of make_sys_image. The archive
being created will be incomplete. As result, the archive cannot
be used for recovering the system.
Regards,
Durvesh
|
|
|
Note: If you are the author of this question and wish to assign points to any of the answers, please login first.For more information on assigning points ,click
here
|
|
|
Sort Answers By:
Date or Points
|
|
Patrick Wallek
|
|
Oct 14, 2009 21:37:39 GMT
Unassigned
|
|
OK.
What is your question? The information given seems self-explanatory. Basically, do NOT trust the ignite tape. It will not work.
You should rerun your make_tape_recovery process ASAP. |
|
|
Durvesh Mendhekar
|
|
Oct 14, 2009 22:50:07 GMT
N/A: Question Author
|
|
Hi,
When i re-run the recovery i got the following error.
ERROR: This is not a no rewind device file.
ERROR: Check tape device failed.
Regards,
Durvesh |
|
Michael Steele
|
|
Oct 14, 2009 23:52:00 GMT
Unassigned
|
|
Hi
a) sighup - sigh - you should know this by now - signal hangup. You were not running the backup in the back ground but manually from your terminal and broke connection before the process ended.
b) there is nothing backed up. To verify the backup, first, paste in your backup command. |
|
|
Raj D.
|
|
Oct 14, 2009 23:56:38 GMT
Unassigned
|
|
Durvesh,
>ERROR: SIGHUP has caused the termination of make_sys_image. The archive
being created will be incomplete.
Means the make_sys_image didnot complete quite well. Check the size of the image you are taking with ignite (size of vg00), and if idex file is created properly, also check if any futher error log available in /var/opt/ignite/recovery/latest/recovery.lo .
- also check the sytanx you are using.
Hth,
Raj. |
|
|
Patrick Wallek
|
|
Oct 15, 2009 03:10:59 GMT
Unassigned
|
|
>>ERROR: This is not a no rewind device file.
>>ERROR: Check tape device failed.
Use the no-rewind device then. You must use a device like /dev/rmt/0mn or 1mn. The tape device file you use MUST end with an 'n' which denotes that it is a no-rewind device. |
|
Printable version
